Date:         Sun, 21 Jan 2001 23:05:07 -0500
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: Fuel pump run on..carbureated 2 liter
Comments: To: Tarheel <puzerewski@EMAIL.MSN.COM>
In-Reply-To:  <009e01c08404$e7fe1d20$8fb5183f@cc414811b>
Content-Type: text/plain; charset="iso-8859-1"

Many rotary fuel pumps run continuously. Pressure is limited by the design
of the pump. The pump should also be installed near the fuel tank, not in
the engine compartment. This will keep the pump from cavitations and causing
vapor-lock.

Dennis


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Tarheel
Sent: Sunday, January 21, 2001 6:50 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Fuel pump run on..carbureated 2 liter


Ok,
    This question is going to take some thought, and probably those that
have changed from FI to carbs will know what to do.

I have an 81 Vanagon westy, that the PO switched to carbs.   I have since
rebuilt the motor, and switched to dual Weber 44's.  Spent today dialing
them in, and it purrs like a kitten.

I had noticed that the after market fuel pump the PO installed runs on and
on when I turn the key on.  It does not build pressure and stop.  So, I
bought a CB performance rotary fuel pump, and although quieter, it does the
same thing.  The former return line is plugged off at the tank, and I even
took off the gas cap to see if venting was a problem.   Still ran on.

I figure pressure should build up in the fuel line and stop.  Nothing is
leaking fuel.

What next?
Adam Puzerewski
81 westy
74 beetle
86 cabrio
Vanagon Partsmobiles