In a message dated 1/23/01 9:58:34 AM Eastern Standard Time, WOGNACIOUS@AOL.COM writes:
> To the brain trust on the list, > I recently installed a new/different instrument cluster in my 85 Vanagon. I > was told it came from an 85 and that it should be a straight swap. Well, > every thing is working except the tach. My old cluster had the clock > instead > of the tach. According to the Bentley it's the 9th pin on the 14 pin > connector. Any help on how I would trouble shoot this would be greatly > appreciated and I would be forever indebted to ya'll. One other > you need to wire a wire from your coil up to your 14pt multi point connector.. chris
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.