In a message dated 1/22/01 12:57:36 PM, Wolfvan88@AOL.COM writes: << To make the sears gauge work without cutting off the Schraeder fitting is to get an air stem valve that goes in an auto tire and cut off all the rubber. Then put a piece of fuel line on one side of the air stem valve the other end will then screw into the Sears Schraeder valve fitted hose end. >> This is a good gender bender, but let us all not forget to gut the valve stem first. Rich |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.