In a message dated 1/23/01 2:11:01 AM Eastern Standard Time, carl_hansen@IEEE.ORG writes:
> Could I have lost a seal going into the Vacuum Assist??>> Yes > > Any way to easily inspect the most likely areas??>> You will have to remove > your brake MC to see if you are leaking into your vacuum brake booster. I > would go around the van again and check over everything. You could also be > loosing fluid from the rear wheel cylinders, and you will have to remove > the drums to check these. The rear wheel cylinders leaking is more common > than leaking into the vacuum booster, but both happen from time to time. > >
Thanks, Ken Wilford Van-Again John 3:16 http://www.vanagain.com Office: (856)-765-1583 Fax: (856)-327-2242
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.