Date:         Wed, 24 Jan 2001 14:22:48 -0500
Reply-To:     Tim Hannink <hanninkt@IX.NETCOM.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tim Hannink <hanninkt@IX.NETCOM.COM>
Subject:      Re: Fuel Lines/Hose Clamps
In-Reply-To:  <015301c08639$04c43800$de30a2d1@wd1000086onem>
Content-Type: text/plain; charset="iso-8859-1"

Fuel pressure for Digifant Injection System Ref: Bentley 24-55

approx. 2.0 bar (29 psi) with vacuum hose on pressure regulator connected
approx. 2.5 bar (36 psi) with vacuum hose on pressure regulator disconnected

Tim Hannink
Winter Park, Florida
1987 Wolfsburg Edition Westfalia Camper - "Goldibox"
http://hanninkt.home.netcom.com/



[SNIP]


I don't know about your '85, but I'm pretty sure the specification for later
Vanagons is about 40 psi.... don't have my Bentley here to check... maybe
someone else can....

Bill

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.