kenneth d lewis wrote: > Larry; > A few years ago I made a batch of these for list members. I > posted some text from those days on my web site. If there is enough > interest I will look into making another lot. > These are custom, single purpose voltmeters so I could make them > read any voltage instead i.e. charging voltage, standby battery reserve > etc.. -------------------------- reply -------------------- It's a simple voltmeter. I use, and everybody else also, the National Semiconductor (or equivalent) LM 3914 "Bar Dot Display Driver". Widely available at your local parts store (not radio shack) or DigiKey etc. http://www.national.com/pf/LM/LM3914.html You can buy a "ready made" LED array with different colors. While driving you can just glance at it with the corner of your eye and can get an idea of what your mixture is. Also good because it is visible at night. Lots of the "Tuning" shops make these things, some sell for as low as $25 last time I looked a couple of years ago. You can build one for less than $10. I may be able to dig up the schematic if anybody needs it. Gary Lee Calgary |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.