In a message dated 2/4/2001 2:21:55 PM Eastern Standard Time, LISTSERV@GERRY.VANAGON.COM writes:
> Non-collapsible pushrod tube installation Sam, I've got two of the spring loaded pushrod tubes on my 2.1 litre in my '87 Westy. They have been there for over four years. No leaks ! Use new seals at both ends and make sure the mating surfaces are clean and undamaged. You should have no leaks. Cheers Frank Condelli Almonte, Ontario, Canada '87 Westy & Lionel Trains Member: <A HREF="http://www.vanagon.com/">Vanagon List</A>, <A HREF="http://www.bcn.net/~limbo/">LiMBO</A>, <A HREF="http://www.westfalia.qc.ca/CIW_English.asp">IWCCC</A> & Capital City VW Club Vanagon/Vanagon Westfalia Service in the Ottawa Valley <A HREF="http://members.aol.com/Fkc43/stebro.htm">STEBRO/Vanagon Stainless Steel Mufflers</A> <A HREF="http://members.aol.com/Fkc43/busindex.html">Frank Condelli & Associates</A> or http://frankcondelli.com
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.