In a message dated 2/6/01 11:16:18 AM, wdavidson@THEGRID.NET writes: << Can anyone tell me what is the size thread is the connection on the fuel pressure test T? >> It is 4mmX0.7 but, that factoid is about useless; good luck finding a banjo fitting and drilled screw of that size. If you look closely at the tee, you will see that the leg which is used as the pressure port has a hose barb formed on its end. The tee is sized for 7mm hose. Rich |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.