Date:         Mon, 5 Feb 2001 18:12:41 EST
Reply-To:     NotaJeep@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steven Denis <NotaJeep@AOL.COM>
Subject:      Re: Bride of RapidIdle
Comments: To: kanas@quality.qadas.com
Content-Type: text/plain; charset="US-ASCII"

 The idle control motor is the cylindrical device on the top of the intake
manifold. the FIRST thing you need to do is take it off (it's held by the
hoses and a rubber hoop type affair) and run carb cleaner/brake cleaner
through it..reinstall it..Better?
No? remove the right (pass side) tail lamp..there is a black "relay" there
..notice how it's pointed with the "open" end up?..remove it and carefully
pry the cover off ...notice all the white and green corroison? it's been full
of water at least once.(if not now!)..TV tuner cleaner and a tooth
brush.....reinstall..better? Pray that you can find a good used one! they
were $200 new last I checked!..When you put the old/new one back in? install
it the "right" way up!

steve

"Hey! nice Jeep, Mister! "
"Look kid, it's NOTAJEEP! "