Date:         Tue, 6 Feb 2001 08:56:07 -0800
Reply-To:     Matthew Pollard <poll7356@UIDAHO.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Matthew Pollard <poll7356@UIDAHO.EDU>
Subject:      Re: fuel pressure test connection size?
Comments: To: Bill Davidson <wdavidson@THEGRID.NET>
In-Reply-To:  <01b401c0905c$780a3620$8830a2d1@wd1000086onem>
Content-Type: TEXT/PLAIN; charset=US-ASCII

I just did this... and i am pretty sure you have to take the screw out to
test the pressure as the screw acts as a plug.  You can fit a fuel line
over the T (it has a mariah to keep the hose on) and then clamp it in
place.  You can run the engine with the gauge in place.
Cheers
Matthew

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.