Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2001, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 6 Feb 2001 14:42:30 -0500
Reply-To:     Jay L Snyder <Jay.L.Snyder@USA.DUPONT.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jay L Snyder <Jay.L.Snyder@USA.DUPONT.COM>
Subject:      Re: fuel pressure test connection size?
Comments: To: Bill Davidson <wdavidson@thegrid.net>
Content-type: text/plain; charset=us-ascii

What is your (FI) problem? How often do need to diagnose your fuel pressure? You certainly can leave a guage and hose on the tee as long as you like, but I think you're going to see only what the regulator is doing. The pump puts out excess pressure, the regulator sends the rest back to the tank. You can remove the vacuum line and see if the pressure jumps up like it is supposed to... If the pressure is too low or too high, I would start by replacing the regulator.

Jay


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.