When I went to buy a new oil pressure switch, the parts guy only had 1.8 bar switches available from his regular vendor. All my references call for a 0.9 bar setpoint and that is what was used in my '90 Syncro. I noticed some sources offer both the 0.9 bar and the 1.8 versions. Was there a production change or is it a matter of personal preference? After all, by the time an engine is showing only 0.9 bar oil pressure off idle, it is pretty much dead. Rich |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.