Forget about rebuilding these things. I used to do this, but they never lasted more than a few thousand miles. The bores are usually scored beyond repair, and if you hone them smooth they are out of spec, out of round, or something that will dramatically shorten their life. Resleeving is the only good repair, and that costs more than new. The list vendors sell these for $50, don't bother trying to rebuild the one you have unless you are planning on selling the van next week. And that would not be nice thing to do Start saving for the master too, they quite often fail around the same time.
Jere & Beth Hawn wrote: > > Hi All, > > First the FIRST! I priced a clutch slave cylinder from all out local parts > store and the dealer came in the lowest at $89.00. > > Second, I am searching the archived looking for a cheap way to rebuild a > slave cylinder.. is it possible? > > Jere > 90 GL > 88 GL -- Stuart MacMillan Seattle '84 Vanagon Westfalia w/2.1 '65 MGB (Daily driver since 1969) '74 MGB GT (Restoring sloooowly) Assisting on Restoration (and spending OPM): '72 MGB GT (Daughter's) '64 MGB (Son's) Stripped and gone but their parts live on: '68 MGB, '73 MGB, '67 MGB GT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.