I was checking my belts today and noticed a couple of things... first of all what is the vacuum related thing attached to the end of my accelerator linkage? It's connected via a tie-rod to the throttle linkage and clamped on the driver's side of the engine. Well, the nut holding it's bracket in place was gone and it was flopping around on top of my engine. Second, at the front of the engine compartment on the driver's side-middle there is a hose-type connector with no hose connected to it. There doesn't appear to be any hoses not connected and the van it running fine. Couldn't find any of these in the Bentley's; but then again if you don't know where and what your looking for in the Bentley's you'll never find it. Thanks in advance. Robyn Seattle 91 Syncro Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.