It took about 1 hour to install in my driveway at night. The toughest part was installing the new pivot ball. Don't be afraid to tap it on with something, mine wouldn't fit around the bend in the shifter without some persuasion. Make sure your linkage is in good shape and your shifter is adjusted properly before installation of the kit. Tim Hannink Winter Park, Florida 1987 Wolfsburg Edition Westfalia Camper - "Goldibox" http://hanninkt.home.netcom.com/
-----Original Message----- From: Frederick M. Wasserstein [mailto:vwvan@cornhusker.net] Sent: Friday, February 23, 2001 12:23 PM To: vanagon@GERRY.VANAGON.COM; Tim Hannink Subject: Re: Re: Berg Short Shift Kit????
I have ordered one from Berg, how hard is it to install, any tips and any thoughts that would make it easier would be appreciated. <SNIP> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.