VANAGON archives -- March 2001, week 1 (#194)

Date:         Sat, 3 Mar 2001 10:41:51 -0800
Reply-To:     Ed DeBolt <eddebolt@NETZERO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ed DeBolt <eddebolt@NETZERO.COM>
Subject:      cv boot lube leakage question
Content-Type: text/plain; charset="iso-8859-1"

Hiya Gearheads

I had my cv boots replaced about 2 yrs ago ( also 2 joints ). now all my
boots look good. no cracking etc but the boot under the starter is losing
its lube from the outside or small side. I don't want to let any of these
joints wear excessively. what are my options? could I use a needle and pump
lube in thru the boot and then patch the needle hole with a bike tire patch?
could I use a cable tie or 2 to stem the leakage?

I don't think I want to change the boots myself. how much should I expect to
pay if I have a shop change the boot(s)

thanks for any advice

ed
87 2wd gl

Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.