Date:         Sun, 4 Mar 2001 11:54:10 EST
Reply-To:     Wolfvan88@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Lilley <Wolfvan88@AOL.COM>
Subject:      Re: Gasket sealant
Comments: To: wolzphoto@worldnet.att.net
Content-Type: multipart/alternative;

 Karl,
I would recommend getting from Bus Boys the Elring-Curil Products T (Head
gaskets) and K2 (Same stuff that VW used originally on case and other parts)
and use them and NOT the Dirko in the kit. Use it for the one side of the
valve covers.

http://www.bus-boys.com/bbzvc.htm

The Dirko is Elring's Third Level sealant...

Put sealant on all parts that you do not want to leak.

I have @40,000 miles on the T sealant on my heads with no leaks.


Robert





[text/html]

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.