Date:         Tue, 6 Mar 2001 06:04:34 EST
Reply-To:     RAlanen@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: Head gasket sealant
Content-Type: multipart/alternative;

       I've got a few private inquires regarding where and how to use the 
head gasket sealant.  Here are my response to those questions which I thought 
would be of benefit to all. 
       Use the sealant on the head gaskets, the cylinder base 0-rings and 
head nut bases and threads. No need to use it on the metal combustion chamber 
gaskets.  I always smear a light coating of the Permatex Copper sealant on 
all 0-rings just for security.  Make sure you get a good liberal coating on 
the rubber head gasket.  This is what keeps the gasket sealed to both 
surfaces during the expansion/contraction of the dissimilar metals which 
allows the coolant to get trapped in between the rubber gasket and the 
aluminium head material leading to the pitting.  
       I do not know anything about the corrosive qualities of any of the 
sealants.  I have always used either Permatex Copper or GE Copper without 
problems.  I cannot comment on other sealants.

Cheers 

Frank Condelli
Almonte, Ontario, Canada
<A HREF="http://members.aol.com/BusFusion/bfhome.htm">BusFusion</A> a VW Camper event in Almonte, June 7-10
'87 Westy & Lionel Trains
Member: <A HREF="http://www.vanagon.com/">Vanagon List</A>, <A HREF="http://www.bcn.net/~limbo/">LiMBO</A>, <A HREF="http://www.westfalia.qc.ca/CIW_English.asp">IWCCC</A> & Capital City VW Club 
Vanagon/Vanagon Westfalia Service in the Ottawa Valley
<A HREF="http://members.aol.com/Fkc43/stebro.htm">STEBRO/Vanagon Stainless Steel Mufflers</A>  
<A HREF="http://members.aol.com/Fkc43/busindex.html">Frank Condelli & Associates</A> or http://frankcondelli.com

 

[text/html]