Is anyone interested in purchasing a set of prototype coil springs for a 2wd vanagon? I am having 5 sets made. They are based on the tallest spring VW made for the vanagon, are slightly stiffer and just a tad taller (1/4-1/2"). The way this would work is that you get the prototypes for about $100 cheaper than what the production springs will cost, and you get them about 8-10 weeks sooner than the production springs will be ready. If for some reason the prototypes do not deliver what the engineer and specs and testing say they should, then you get a free set of the production springs incorporating any changes to the prototype specs. I would like to get a spread of model years to test these. They are designed for westfalias. Lee me know if you are interested. The springs will be top quality in materials and workmanship. Steve |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.