I was cleaning the motor today and found that the belt tension adjustment bolt for the compressor wasn't attached to anything, just hanging loosely in the bracket. Does anyone have a spare or know can tell me how the adjustment system looks so I can make one? I assume it would be an "L" bracket with a nut welded on each flat. The holes would need to be offset to keep the adjusting bolt from hitting the hold-down bolt on the rear of the bracket. I can't seem to access my Bentley manual on my laptop CD-rom, so all help would be appreciated. Don't forget about the Orlando VW Show-n-Shine at Downey Park tomorrow sponsored by the Central Florida VW Club. Go to http://www.tekpage.com/cfvwc for more info. There are also some pictures of Goldibox at the most recent meetings. Tim Hannink Winter Park, Florida 1987 Wolfsburg Edition Westfalia Camper - "Goldibox" http://hanninkt.home.netcom.com/ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.