If it is the lock that's broken, that can be repaired. Typically, though, as Cris said, it is the casting itself that breaks, and repairs are not possible. He mentioned that he has late model handles, but no earlier ones. I'm out of handles, too. I have several lock cylinders, but no castings. I have successfully modified the later ones for use on the early vans. Simply cut the tip off the handle with a hacksaw. Then fill the end with JB weld, and file smooth after it sets. Works fine. Feel free to contact me should you have questions. Steve Sandlin http://www.steveslockshop.com '84 Wolfsburg Westy '79 Transporter '00 New Beetle |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.