Epoxy should work fine, but I doubt that the plastic used in this fitting can be "welded" with super glue. Bars Leaks sells the solid type two part epoxy for this application, and epoxy is epoxy. http://www.barsleaks.com/Cooling_System/cooling_system.html Stebbins wrote: > > I may have to use some HOUSEHOLD epoxy or super glue on the > coolant diversion block (distribution unit). Does anyone > know if household (2 part) expoy or household super glue > will tolerate the temperatures of the coolant system? > Thanks, Malcolm -- Stuart MacMillan Seattle '84 Vanagon Westfalia w/2.1 '65 MGB (Daily driver since 1969) '74 MGB GT (Restoring sloooowly) Assisting on Restoration (and spending OPM): '72 MGB GT (Daughter's) '64 MGB (Son's) Stripped and gone but their parts live on: '68 MGB, '73 MGB, '67 MGB GT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.