Darrell, I was wondering if anyone has installed the digitool into the clock readout of the dash. There are also areas just above the digital readout of the clock where the led's could be placed cleanly.......It seems that a multi position switch could be hooked up to transform the digital clock into the readout of the digitool with the led display located in the little squares above the clock.........And then when you are done checking the ECU readings, you can switch the display back to the clock.....It seems possible if wired correctly.....Darrel , what do you think? Malibu Tony 85' Westy......1.9L now at 8 degrees BTDC......39 degrees total advance |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.