The rear is easily adjusted for Camber and Toe. The Inner control mount is slotted to adjust the Toe in/out, the outer mount is slotted for the Camber. Dennis
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf Of Greenamyer, William L Sent: Friday, March 16, 2001 11:12 AM To: vanagon@GERRY.VANAGON.COM Subject: tire wear in the rear
Got another question here. I seem to be getting outside edge wear on the rear tires on my 84GL. There are no rear allignment adjustments for this vehicle. Just checking to see if anyone else has had this problem and how they solved it. The tires being used are 185/R14 which is called out for this vehicle. The front tires appear to be wearing fine. William |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.