on 3/19/01 3:21 PM, chad knutson at cskanute@BITSTREAM.NET wrote: > That metal piece just kind of sits in there with its edges wedged between > the light housing and the opening over the tach/speedo. Mine came out once > while I was fiddling around. I managed to get it back in by using the other > one still intact above the speedo as a guide. I have no idea whether lack of > the piece will cause heat issues inside your instrument panel, but I would > doubt it. > one of mine is sitting at the bottom of the housing in front of the speedometer. i wondered what that rusty little piece of metal was. once i get time, it comes out, and hopefully will go back in. bill '87 syncro westfalia http://www.scruznet.com/~cikasper/pics/westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.