Dennis Haynes wrote: > The rear is easily adjusted for Camber and Toe. The Inner control mount is > slotted to adjust the Toe in/out, the outer mount is slotted for the Camber. > > Dennis Dennis: Have you done this adjustment? I have not found it to be "easy". Following the Bentley procedure, after loosening the large bolt (with difficulty), I could get very little movement at the slot and there was no noticeable improvement in the camber. Larry A. 91 GL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.