Date:         Wed, 21 Mar 2001 18:56:15 -0600
Reply-To:     "Smola, Tony" <TSmola@TRIBUNE.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Smola, Tony" <TSmola@TRIBUNE.COM>
Subject:      digital VW clock transformed into digitool
Comments: To: "midwesty@midwest.net" <midwesty@midwest.net>
Content-Type: text/plain; charset="iso-8859-1"

Darrell,
 I was wondering if anyone has installed the digitool into the clock readout
of the dash.  There are also areas just above the digital readout of the
clock where the led's could be placed cleanly.......It seems that a multi
position switch could be hooked up to transform the digital clock into the
readout of the digitool with the led display located in the little squares
above the clock.........And then when you are done checking the ECU
readings, you can switch the display back to the clock.....It seems possible
if wired correctly.....Darrel , what do you think?

Malibu Tony  85' Westy......1.9L now at 8 degrees BTDC......39 degrees total
advance