Stuart, If the glued panels failed it was probably due to one of two different things. (1) improperly prepared mating surfaces (2) wrong, or cheap adhesive. Ford Iknow for a fact has been using a Body panel adhesive on their doors and quarter panels for at least 10 years. I have used 3-M body panel adhesive on the front cowel panels of Mack trucks for at least that long, with no failures, ever. It all depends on who's doing the work, and how and what's applied. Later, ______________ |[ ] [ ] [ ]\ | | | | ||-(())----(())-| Terry 85 GL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.