I am finishing up the Subaru conversion to my syncro this week and Zoltan's question got me thinking about wether or not my rear core was in the open or closed position. (The Subie engine Must have one of the two cores open or it will overheat). Soooo, as I was looking at the valve I dicovered that it is difficult to tell what part of the valve should be pointing forward for the 'On' position. The top of the valve handle of the bottom, there are no signifying marks on it.
Mike G. Zoltan wrote: > I have received the info from David Beierl that forward is open, back > is closed. No more discussion is needed on this issue. Thanks > David.Zoltan > > ----- Original Message ----- > From: Zoltan > To: vanagon@GERRY.VANAGON.COM > Sent: Monday, March 26, 2001 4:20 PM > Subject: REAR HEATER VALVE > The Bentley does not say which way is open or closed.Could > any of you tell me right now. I am just busy emptying the > system and now I need to know. Thanks in advance.Zoltan >
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.