I forgot to mention trhat the Hall sender is new prior to thwe rengine removal. NEXT? ----- Original Message ----- From: "Randy Herd" <randyherd@HOTMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, March 28, 2001 8:19 AM Subject: Re: Strange" no start" symptoms(long)
> Mine turned out to be to hall sender in the dist. Took the ecu with it. > Difficult to remove from dist but was shorted out on the bottom of the > plastic wiring connector elbow. Would crank, catch (sometimes) & die. > Sometimes would run until you tried to increase the engine speed. > > Easy to check with a multimeter. > > The old one had all of the bottom plastic missing and been glued on the > sides (Also only had one screw holding the unit in.) > > > > Randy Herd > 86 GL Weekender > 68 Kombi > 98 Jeep Cherokee > > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.