Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2001, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 28 Mar 2001 21:27:41 -0800
Reply-To:     phil stanhope <napszeerf@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         phil stanhope <napszeerf@YAHOO.COM>
Subject:      Re: Things I have learned on taking out the cabinets
In-Reply-To:  <F1F6A239E599D211A55E00105A2192B14FCAC1@LAW>
Content-Type: text/plain; charset=us-ascii

"this has been an experience".

YOU BET!! I did the same thing. But all i did was spray corrosion inhibitor on the inside of that seam. Then I put it all back together. What a JOB! Wish i cut and welded the seam like you did.

Do you have any photos of the seam welding???

Phil 84' all white Westfalia "Millenium Falcon" 84' all brown Rustfalia/Wolfy GL "Sh*thawk" 8100 AV PPC 100Mhz B+W G3 450 MHz 256mg ram

--- "Cooper, Jonathan R." <cooper@BQMLAW.COM> wrote: > Well, this was my (our) year to go back to the paint > shop to have the seams > sandblasted and the bottom half repainted. I saw > some rust on the seam below > the outlets and worried that the condensation had > gotten to it. I took out > the 'fridge and sure enough, the floor was rusted > and both sides of the seam > were bad. > > So we decided (I and Mike at Euclid Foreign Motors > here in Cleveland) to > take out the seam and weld in new metal. It looks > beautiful. > > NOW THEN. I took the cabinets out, which was a pain, > but not too bad. > Putting them back in taught me a couple of things. > First, it is probably easier to put the rear cabinet > in first. I did it the > reverse and it was alot harder. > Second, remove anything that these items might hang > up on. The fit is really > tight, so the little grille at the rear of the > Fridge/stove cabinet needs to > come out, I chipped some Formica (I know its not > but...) on this. The coat > closet door is also worth removing, together with > its hinges. > Third, watch out for the plastic parts, the water > inlet, the faucet, etc... > they are all brittle, and if you tug, they will > break. > > So I am almost done, but this has been an > experience. > > Jonathan R. Cooper > Brzytwa, Quick & McCrystal > 900 Skylight Office Tower > Cleveland, OH 44113 > Cooper@BQMlaw.com > > > 85 Westy > 90 Cabriolet

__________________________________________________ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/?.refer=text


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.