Tom wrote The push rod won't seat as far as the others did and the adjusting screw is out all the way and there is no play between it and the valve stem. What gives? Tom to get the push rod into the lifter socket you need to lift the push rods with a screw driver as you press the rocker shaft in your other hand and then install the nuts for the rocker shaft Bob
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.