Date:         Sat, 7 Apr 2001 10:07:30 -0400
Reply-To:     Robert Donalds <bostneng@FCL-US.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Donalds <bostneng@FCL-US.NET>
Subject:      Re: Adjusting valves on '91 Carat
Comments: To: TStone8359@AOL.COM
Content-Type: multipart/alternative;

Tom wrote 

The push rod won't seat as far as the others
did and the adjusting screw is out all the way and there is no play between
it and the valve stem.  What gives?  
Tom
 to get the push rod into the lifter socket you need to lift the push rods with a screw driver as you press the rocker shaft in your other hand and then install the nuts for the rocker shaft
Bob

[text/html]

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.