In a message dated 4/10/01 1:08:18 PM, echosmurf@YAHOO.COM writes: << I mean Like CAD layouts or such? >> Mike, Just do what I did. Gather together whatever pieces you have then go to town on them with a caliper and record your measurements on a piece of paper with, God forbid, a pencil (a No.2 Black Warrior is good enough). Nothing is very precise about these things, so allow yourself all the slop you can get wherever you can get away with it. One more thing: when you are finished with the job, don't throw away your notes because someone named Mike might need them some day. Rich |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.