Date:         Fri, 13 Apr 2001 09:12:22 -0400
Reply-To:     Ed Shultz <eshultz@GENUITY.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ed Shultz <eshultz@GENUITY.COM>
Subject:      Re: Passat 15 in wheels w spacers, correction to ??
Comments: To: "Samuel L. Walters" <slwalters@EARTHLINK.NET>
In-Reply-To:  <3AD68A32.B0DE28A2@earthlink.net>
Content-Type: text/plain; charset="us-ascii"; format=flowed

Hi,

I have the Passat wheels installed on my syncro without the spacers. I
brought the stock steel wheels to a local machine shop and had them
increase the center hub diameter by about 10 mm. (don't quote me on that, I
would have to double check) I think any good machine shop can do this for
you.  I don't think that the stock Passat steel wheels will fit over the
center hubs on the Vanagon. either the front or rears. Like you say, the
offset will remain the same. I run 205/60-15's on them also.

-Ed


At 01:10 AM 04/13/2001 -0400, Samuel L. Walters wrote:
>Volks,
>
>I misstated the offset of the Passat wheels, it is 45 not 38 according
>to the TireRack Steel Wheels chart.  So an 8 mm spacer would only get
>the offset back to 37.
>
>According to this same chart, there are several Mercedes 15" wheels
>with 5x112 bolt pattern that have a 37 offset.  These are wheels for
>the 190D & E (84-93), 300 E, CE & TE (86-95), and C220, C230 & C280
>(94-00).  Perhaps one of these models paired with the 8 mm spacer would
>do the job.
>
>Anyone have experience with these wheels and the Vanagon or Syncro,
>with or without spacers.
>
>Sam Walters


Ed Shultz, RCDD
GENUiTY, Inc.
Manager, Network Systems Design
NSD Home Page: http://eng-web.genuity.com/net-eng/ipeng/nsd/ipnsd.htm
V: 781-262-4324,  F:781-262-2744,  P:1151209@skymail.com