Remove the transmission it is easier and there is less to unhook and hook back up. Just get either a set of ramps or jack stands for the van and a floor jack to lower and raise the tranny (one with wheels). Then support the engine with a different jack. Unhooking the CV axles is the hardest part and not that bad if you clean out the bolt heads with a pick. Hope this helps. Thanks, Ken Wilford John 3:16 www.vanagain.com Phone: (856)-765-1583 Fax: (856)-327-2242
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.