Going from memory...it's on the right side, above and forward of the axle...you'll need a 17 mm. Allen wrench...this is on a two wheel drive. -Dana- mike and shari wrote: > > I just recently (1k ago) put a Subaru engine in my syncro. All has been > well except shifting has been tough. I have to really push the clutch > pedal to the wall and double clutch to gear down, (even then it scrapes > alittle). I bled the slave sylinder and there was no change. The > master does not leak fluid. The trans has 160k on it amd has a small > leak coming from the right side driveshaft. I felt the trans after > driving on the freeway and it was hot, is this normal? I'd like to > check the fluid level and maybe add some more but where is the > filler???? Help! > > Mike G. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.