Hi, Well I just took my fridge out to check connections and the 12 volt heater. I had a problem with the Fridge running on 12 volt, it did not get cold. I found that the connections for the 12 volt resistor/heater were very coroded at the selector switch. The plastic holders on the female part of the spade plugs had started to melt. I cleaned up the connections and replaced the female ends of the plugs and it sure seems to work better. Anyways if anyone has problems running their fridge on 12 volt it might be something to check. Does anyone know if the LED pilot is supposed to glow if the fridge is switched to ac/dc current. The green LED glows when it's on 12 volt and propane but does not glow when switched to ac/dc....... Thanks for your time. This is such a great list. I have learned so much about my 84 Westy. Jeff S |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.