Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2001, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 15 Apr 2001 17:59:21 -0700
Reply-To:     Don Hundt <dhundt@PCEZ.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Don Hundt <dhundt@PCEZ.COM>
Subject:      Re: Load Reduction Relay: what's it do?
Comments: To: Oxroad@AOL.COM
Content-Type: text/plain; charset="iso-8859-1"

jeff, I'm not sure exactly what it does, maybe it's just a little box full of magic. I had the same symptoms with mine, replaced it and all was well. It was only a couple bucks, pretty common in a lot of applications. I think it's also known as an x-relay. Good luck, Don ----- Original Message ----- From: Jeffrey R <Oxroad@AOL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, April 15, 2001 5:07 PM Subject: Load Reduction Relay: what's it do?

> Two questions please: > > Part Number: 171 937 503 > > 1.What does the Load Reduction Relay do? (It's mounted on top of the fuse > box) > > 2. It seems mine is bad. It has to be shaken a bit to make it work sometimes > and the connection of the four wires to it seem good so I'm not blaming them > (even just cleaned the contacts and all). For example the windshield wipers > won't work--jiggle the yellow and black wire coming off the relay and the > wipers come on. Also it would SEEM the relay stays engaged after the engine > is turned off. I would think this is not normal. I'm basing that assumption > on the fact that the rear heater fan and sometimes the windshield wipers will > run after the engine is shut off--then after a minute or so they'll shut off. > For better or worse I've opened the relay to look at it's innards. And of > course now that I have it open it works correctly--if in fact it was ever to > blame. Maybe just enough josteling to have it work for a while? So the > question: > > Does this relay simply disengage power to rear heater fan and wipers and the > like when the starter motor is engaged and then complete the current to > accessories when the engine is running and then cut off the circuit when the > key is shut off? Or is there more? And might I get away with replacing the > relay or is it something else down the line that would cause it to > malfunction? (Wires from the load reduction relay seem to also go to the A/C > relays or maybe aftermarket cruise control relays among other things. > Whatever the case those relays (A/C or cruise control) will click on and off > when the key is ON and the load reduction relay is jiggled slightly. > > Any help will be appreciated. > > Thanks > Jeff > 83.5 Westy > LA,CA >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.