Date:         Tue, 24 Apr 2001 21:59:35 -0500
Reply-To:     "Smola, Tony" <TSmola@tribune.com>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Smola, Tony" <TSmola@tribune.com>
Subject:      why install substandard seals in your vanagon
Content-Type: text/plain; charset="iso-8859-1"

I am wondering why anyone would install the black silicone main seals in a
Vanagon when one could install the red or even better the VITON ( green)
main seals.  They are not that much more and can take the heat alot better.
Especially if you have an aircooled vanagon.
I use VITON on my 911 and would reccomend that someone who is going to
install front or rear main seals use the VITON seals.

Malibu Tony  85' Westy    6 degrees BTDC  42 degrees full
advance..........no chip necessary

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.