Date:         Wed, 25 Apr 2001 20:45:05 -0700
Reply-To:     Mark Sheflo <skjeflo@home.com>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mark Sheflo <skjeflo@home.com>
Subject:      Re: Aircooled foam
Content-Type: text/plain; charset="iso-8859-1"

I generally use my hand to hold things :-)

In this case however, I believe that the engine seal is just pressed on and
held by pressure alone.  At least that's how my old one was and how the new
one is put o as well.
Mark
82 Westy


----- Original Message -----

| What is the proper adherent to use to hold the foam around the cooling tin
| on an aircooled engine?
|

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.