The screws threads are fine and it seems to take forever to get out doing half turns, so be patient and it will come off.
Adam Puzerewski 81 westy 74 beetle 73 Transporter (new!!!!!!!) Vanagon Partsmobiles ----- Original Message ----- From: "Stan Wilder" <wilden1@juno.com> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, May 05, 2001 10:47 AM Subject: Re: [VANAGON] ISO Sliding Window Latch
> The little sliding door latch has a screw up through the bottom. You > need a little 90 Degree straight slot screwdriver to get at the screw. Be > careful when it comes off there is a little spring that will fall out as > the lastch comes off dis-assembled. > > That's it. > > Stan Wilder > 83 Westfalia Air Cooled > > On Sat, 5 May 2001 20:50:27 +1000 Ray Hunnam <hunnam@pnc.com.au> writes: > > Stephen > > > > There was a post recently from someone wanting to know how to take > > the > > sliding window apart. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.