Date:         Wed, 2 May 2001 20:33:57 -0400
Reply-To:     Hector Zapata <hector.zapata@xrxgsn.com>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Hector Zapata <hector.zapata@xrxgsn.com>
Subject:      Re: Drivinlights
Content-Type: text/plain; charset="iso-8859-1"

I have mine on the fiberglass bumper. Is your 86 like my 90? Just mark where
you want them, remove the two allen bolts on the front of the cover, add the
other bolts on the sides, from below. Drill a pilot hole, and then the size
you need. After you mount the aux. lights, leave the bumper and the lights
loose so you can align them, tighten everything down, but don't overtighten
the lights, you could crush the fiberglass. I didn't use washers from
underneath, my bad. Now my kid just puts them looking at each other, from
time to time...


-----Original Message-----
From: Dieter Knittel <DieterKnittel@aol.com>
To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM>
Date: Tuesday, May 01, 2001 9:33 PM
Subject: Re: Drivinlights


Hello list:
any there who has installed add. driving or for lights ?
i cheked the bumper but, there is no way where i can mount them without
rmoving the bumper i guess, just no space to put the back nut on the srew?
1986 Vanagon GL 2.1 4 cy. shift
Dieter
Branson,missouri