Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2001, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 6 May 2001 12:32:51 EDT
Reply-To:     DieterKnittel@aol.com
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dieter Knittel <DieterKnittel@aol.com>
Subject:      1986GL update
Content-Type:  text/plain; charset="US-ASCII"

Ok, i was getting a lot of helpfull e-mail over the last 24 hr. !! its amazing how helpfull people can be, i never experinced that before !! Thanks for all the e-mails from all of you ! Now i have cheked every !! cable in and around the engine....I found 2 of them where disconnected, I connected them again but again not change in performance. I also took that lid of the AFM, removed the silicon etc.....everythink there looks ok ? no build up except a little white stuff I removed from the top brown wire connection . I put everyhtink back in order like it was. I started up the Engine, and lord behold....the back door witch was nicely above me came rumbling down and hit me on my head...Auggggggggggghh I think now I need 2 new Hydraulick arms for that think too. Man, always something new...Well i brached the hatch door with a 2x4 pice of lumber..OK after i started the engine, it runs for about 20 sec. then totally starts jerking and puffing and Dies? Guys what did i do now ? I have lost about 8 pounds of weight in the last 2 weeks, im getting grey hairs and now i have a headack too, because that Darn door came down on my head. I have installed New spark plugs...Champion...i changed the Oil 10-30 Penzoil. I have detached each sparkplug wire to see if it makes a difference...it did, so it tells me the cyl are ok. By the way the AFM is a new one i talked to the former Owner he said he installed the part himself brand new 6 weeks ago. I cheked that connector behind the Taillight...its all good no dirt or broken connectors. I did everyhtink i have received in all those helpfull e-mails...but Honestly...each time i touch something on that engine....i make it worse i guess. I like that Van.......and if i could afford it, I just would park it and work on it till I get it right, I wish there would be someone down here who could help me, but im in the middle of nowhere. Well i keep the List update with my experince here, till I either fixed it or is has been Sold. Now I got to go and get 2 new Hydraulik arms for that back hatch door, or it will fall down on me again. P.S> sorry about my spelling, im original from germany Dieter Branson, Missouri 1986 vanagon GL 2.1 watercooled, 4 speed


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.