Thanks, Ken. I am just taking a break from mounting the fronts. I used stainless steel rivets. One of my fron flares came pre-drilled, the other did not. Once i figured out that the fiberglass just follows the edge of the steel, it was easy and is sturdy. Coming to Hollister, Ken? It's right down the road. steve Syncro5@aol.com wrote: > > In a message dated 5/11/01 11:09:03 AM, sxs@concentric.net writes: > > >Can someone tell me how the front fender flares are > >attached to the 16" syncros > > Hi Steve and All, > > I have the 16'' fender flares on my syncro. The front are two piece, the big > part mount on to the door as you said. Since mine came with no hardware, I > used stainless steel screws to fasten them to the doors. There were no holes > in this part of the flares, so I drilled my own. > > Good Luck. > Ken Herman > 86 Syncro Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.