Is the fuel line I need for my bus with Fuel Injection pretty standard? The fuel line is wet when the bus has just been running at a spot where the plastic hose meets a rubber hose to go through the fire wall into the engine compartment over the starter motor. It looks like there is plastic line from the fuel pump to a rubber hose to a fitting that passes through the firewall and then again attaches to some rubber hose to the fuel pressure regulator I would guess. I'm guessing the rubber lines are 5mm "high pressure" hose. As for the plastic lengths will I be able to find that at a local parts store? (My bus is an 83.5 Westy). I think I may have time to order the plastic line from a list vendor since I think it's length of rubber hose that's leaking--and I think Ken sells a kit. But info on the rubber hose will be much appreciated since I have no real experience with purchasing FI fuel line and haven't found a knowledgable parts store in this area. (Burbank, CA) Thanks Jeff 83.5 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.