Date:         Tue, 15 May 2001 11:50:49 -0400
Reply-To:     Jay L Snyder <Jay.L.Snyder@usa.dupont.com>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jay L Snyder <Jay.L.Snyder@usa.dupont.com>
Subject:      Battery Disconnect
Content-type: text/plain; charset=us-ascii

To completely isolate the second battery I put under the back seat, is
disconnecting  the (-) cable sufficient or should I disconnect both (+) and
(-)?  Both batteries are tied together right now.  The "second" battery is
actually the one I want to save for starting purposes since it has the
heavier cables going directly to the starter.  (The original battery is
still in place with all the factory wiring intact.)  One of these lever
style disconnects would work very nicely for this.

                                                   Jay  '85 Westy (The
Hindenburg)

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.