There is very little internally inside the transmission that will cause shifter movement...Most likely the eng/trans mounts and linkage are the problem...There are shims for the Pinion shaft..(non changeble) and none for the maianshaft. Don't worry about it being a trans problem unless you have a noise or shifting problem would be my advice. Any movement internal in the trans would give you drivetrain slop and not shifter play. Daryl of AA Transaxle Duvall, WA.(Seattle area) (425) 788-4070 1-877-377-0773 toll free http://www.aatransaxle.com (web site) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.