Hi all, OK, gonna replace ball joints and control arm bushings here in the near future. I've been reviewing the Haynes manual for a quick reference and my question is... 1..Can you "pickle fork" the lower ball joint out of the steering knuckle? Is there enough pressure applied from the coil spring to do this or must a special separator tool be used? then.. 2..Is there anyway around using a press to get the lower joint out of the lower control arm? Thanks! Mikey `87 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.