Doug, Yes you could leave the jams go un- masked, if your using the same color. Usually the door seals will keep out most of the overspray, but I use a liquid mask, to assure clean jams. You spray- brush it on, and when your all done painting and rubbng, etc., you simply take a wet rag, or a low pressure hose, and all the overspray,and rubbing compound washes off. Pretty simple, works good. Or you could just do nothing, and wipe the jams and door gaskets clean with laquer thinner. This works OK too, but you have to be careful of not letting the thinner get close to any of the fresh paint. ______________ |[ ] [ ] [ ]\ | | | | ||-(())----(())-|
Terry 74 Campmobile (Clementine) 85 GL 86 BMW 325 ES |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.